English 
Indonesian 
Bearing Units - Plummer Block & Accessories
A plummer block also known as a pillow block bearing, are pedestal mounting bearing housings and consist of a mounting block which houses a bearing. The block is fixed to a base and a shaft is inserted which lets the inner part to rotate. To obtain a tight fit, the inside of the bearing is usually a little bit bigger than the shaft and set screws or locking collars can be used to secure the shaft.Plummer blocks or pillow blocks are designed to safely mount a bearing which lets its outer ring to stay still but allows the inner ring to rotate. The housing is bolted by holes in the base and the bearing housings can be either split type (two piece housings) or solid type (single piece housings). Sealings provide dust and other contaminants from getting into the housing which allows the bearing to rotate in a clean space whilst retaining lubrication (grease or oil) which helps increase its performance. Pillow block bearings can also contain different types of bearings which include ball, roller and tapered.Plummer blocks come in various sizes and they are usually made from cast iron or cast steel. At RS we stock a range of reliable and easy to install plummer blocks or pillow block bearings to meet all your bearing solution requirements which allows machines and equipment to be used over and over for a long period of time.ApplicationsPlummer blocks are also referred to as a housed bearing unit which means that they are self-contained and greased and ready to be installed on your equipment. They are also available in various sizes to suit a wide range of applications including:Packaging equipmentConveyor systemsAgricultural equipmentConstruction plantHeat treatment equipment
Showing all 22 results
-
2 BOLT PILLOW BLOCK 1 1/2 INCH
IDR414,525.28 -
2 BOLT PILLOW BLOCK 1 INCH
IDR222,052.13 -
2 BOLT PILLOW BLOCK 20MM
IDR209,045.77 -
2 BOLT PILLOW BLOCK 25MM
IDR222,157.02 -
2 BOLT PILLOW BLOCK 3/4 INCH
IDR228,660.20 -
2 BOLT PILLOW BLOCK 3/8 INCH
IDR133,524.97 -
2 BOLT PILLOW BLOCK 30MM
IDR273,762.90 -
2 BOLT PILLOW BLOCK 40MM
IDR400,574.91 -
2 BOLT PILLOW BLOCK 60MM
IDR921,773.32 -
2 BOLT PILLOW BLOCK 7/8 INCH
IDR222,052.13 -
2 BOLT PILLOW BLOCK MEDIUM DUTY 25MM
IDR325,578.56 -
2 BOLT PILLOW BLOCK SHORT BASE 30MM
IDR291,699.09 -
2 BOLT PLUMMER BLOCK HOUSED UNIT ID 20MM
IDR444,418.93 -
IGUS(R) PEDESTAL BEARING,10MM ID
IDR126,287.56 -
IGUS(R) PEDESTAL BEARING,16MM ID
IDR175,585.86 -
PEDESTAL BEARING UNIT,20MM ID
IDR687,868.62 -
PEDESTAL BEARING UNIT,SY 20MM ID
IDR536,722.13 -
PEDESTAL BEARING UNIT,SY 25MM ID
IDR624,934.62 -
PILLOW BLOCK BEARING UNIT,LPB 16MM ID
IDR347,081.01 -
PILLOW BLOCK BEARING,NP 1.1/2 INCH ID
IDR914,011.46 -
PRESSED STEEL PEDESTAL BEARING,5/8INID
IDR474,312.58 -
Y-BEARING PLUMMER BLOCK UNIT 20MM BORE
IDR1,308,397.86
